loading
| Availability: | |
|---|---|
VEP-01
Vicus-Vida
VEP-01
VEP-01 High Permeable Epoxy Resin Grout Materials
Characteristics
1. Low viscosity, good perfusion, can be filled in seam less than 0.02mm;
2. Concrete bond strength is high, generally larger than the tensilestrength of concrete itself;
3. The compressive strength and tensile strength of the material after curing are very good, It has better reinforcing and strengthening effect ;
4. Good affinity of slurry to wet base surface;
5. Solidification time can be adjusted, the range can be within 1-5 hours;
6. Operation is convenient, do not need complicated preparation. AB component only After mixing evenly according to 4:1 ratio, grouting can be made.
Key Performance Indicators
Item | Indicators | |
Density (g/cm3) | 1.05-1.20 | |
Initial Viscosity (25℃, mPa·s) | ≤200 | |
Operable Time (min) | ＞30 | |
Body Compressive Sstrength (MPa,7d) | ≥70 | |
Initial Setting Time (min) | 45 | |
Complete Curing Time (h) | 24 | |
Body Tensile Strength (MPa) | ≥15 dry bond | |
Bond Strength (MPa) | Dry Bonding | ≥4.0 |
Wet Adhesion | ≥2.5 | |
Impervious Pressure/ M pa | ≥1.2 | |
The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.
Application
1. Stability and reinforcement of the building due to pouring defects caused by honeycomb, holes, uneven expansion of concrete and sinking of the formation of fine cracks.
2. Reinforcement and filling of broken and loose rock mass in tunnel, subway, tunnel, roadway, etc.
3. Rapid filling of underwater defects and voids in dams, levees, seaports, wharves and bridges Filling and reinforcement treatment.Concrete cracks in subway,tunnel, mine and various tunnels.
Points for Attention
1. Resin and materials have slight irritation, no entrance, no eye, no bare hand contact. Do not rule out personal physique, direct contact caused by skin redness, itching and other allergic
reactions. Wear glasses and rubber gloves during construction. Skin contact: wash with soapy water immediately, enter the eye or eat by mistake: rinse with water for 15 minutes and send to
medical treatment.
2. This product contains certain volatile solvents, flammable, not open fire.
3. The material has high activity, polymerization of water (including water vapor in air) can not be wet.After opening the package, it should be used once and not twice.
4. Materials are not edible and avoid contact with human food sources. Do not live or work long-term in warehouse workshop.
Storage Conditions
15-30℃, dry and cool warehouse, avoid direct sunlight.
Shelf Lift :6 months.
